Nylon Extrusion Process

The Nylon Extrusion Process mainly includes the following steps:

1. Raw material preparation: Choose nylon resin, reinforcement agent, lubricant, dyeing agent, etc. as the main raw materials, and dry treatment.

2. Mixture preparation: Mix the raw materials evenly to ensure that each component is fully mixed.

3 Extrusion: the mixed raw materials into the extruder, after high temperature and high pressure heating melting, so that the raw materials into a molten state. The molten material is then extruded through a screw or die to form a specific shape, such as a nylon rod.

4. Cooling and curing: the extruded nylon material is cooled through the cooling device to cure it. The control of the cooling rate has a great impact on the performance of the final product.

5. Follow-up treatment: According to needs, the nylon material can be cut, polished, polished and other follow-up treatment to meet the specific size and appearance requirements.

In the whole Process of Nylon Extrusion, the control of parameters such as temperature, pressure and speed is very important, which directly affects the quality and performance of nylon products. For example, too high or too low a temperature can affect the physical and chemical properties of the product; Lack of pressure may cause the product to be loose or contain air bubbles; Too fast or too slow may affect the tensile strength and surface quality of the product.

In addition, in order to ensure the quality and stable performance of products, strict quality control of raw materials is also needed to ensure that the quality and proportion of raw materials meet the production requirements. At the same time, regular maintenance and inspection of the production equipment to ensure the normal operation and accuracy of the equipment.